Factory Sample Rigid Rear Fender Assembled

You will also need another part

• Suggested to use with #50-0913 Rear Fender Trim Set.
• The left side fender relief plate is built in as part of themain fender body. Fender tail is not drilled or cut out for tail lamp installation.
• *NOTE: There are holes in the fender that will need to be filled. *NOTE: Optimal updated hinge is available for restorers who would like to replacehing on our fenders.
• *Note: UPS may consider this part as packaged "oversize" forshipment, as compared to the actual weight, which will result in higher shipping costs.
• Required *NOTE: We have an updated rear hinge available to replace existing hinge. Must be riveted in place, #50-1243 Replica Rigid Rear Fender Hinge.