Factory Sample 22" Inline Spring Fork Chrome +4"

You will also need another part

• Unit is unpolished at the rear fork stem cross plate and at the front spring fork rod forging.
• Required *NOTE: Must order shock, ride control, axle assembly, top tree and bearing kit, as required.
• How we measure Spring Forks. NOTE: Measurement is from the triple tree where stem and lower bearing sits, to the axle position. This is the effective length, as it is the legnth
• from the lower bearing cup on the frame to axle. Installer can slide a pipe or solid bar thru the bearing cups and measure the length that may be needed for the desired frame
• height. This Spring Fork assembly accepts a 3/4" axle for custom applications. As rockers are not offset (as on replica Spring Forks). 1" stem utilized tapered bearings for
• ease of installation.